eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Rotor, Alternator > < Alternator Relay|Locations
Page 1
background image

Rectifier Diode / Bridge: Testing and Inspection

Positive Rectifier Test

Check the continuity between the (+) heat sink and the stator coil lead wire connection terminal with an ohmmeter. If there is continuity in both
directions, the diode is shorted, so replace the rectifier.

Negative Rectifier Test

Check the continuity between the (-) heat sink and the stator coil lead wire connection terminal. If there is continuity in both directions, the diode is
shorted, so replace the rectifier.

Diode Trio Test

Connect a multimeter to both sides of each diode, and check each of the three diodes for continuity. If there is no continuity, that particular diode is
damaged and the rectifier must be replaced.

Rotor, Alternator > < Alternator Relay|Locations