Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
REMOVAL
1. Drain power steering fluid.
2. Remove stabilizer bar.
3. Follow removal steps outlined in the illustration, noting the following.
4. Disconnect the brake fluid level sensor connector and remove the brake fluid reservoir assembly from the dash panel with the hose still attached.
NOTE: Place the removed reservoir assembly in a place where it will not be a hindrance when removing and installing the power steering gear
box, and tie it with a cord.
5. Disconnect the A/C compressor connector and remove the compressor from the compressor bracket with the hose still attached.
NOTE: Place the removed A/C compressor in a place where it will not be a hindrance when removing and installing the brake fluid reservoir
assembly, and tie it with a cord.
CAUTION: Do not damage the joint between the A1C hose and the A1C pipe.