Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
standard value.
23. Using the special tools, rotate the pinion gear at the rate of one rotation in approximately 4 to 6 seconds to check the total pinion torque.
CAUTION:
1.
When adjusting, set the standard value at its highest value.
2.
Assure no ratcheting or catching when operating rack towards the shaft direction.
NOTE: When it cannot be adjusted within the specified return angle, check rack support cover components or replace.
24. After adjusting, lock rack support cover with lock nut.
25. After installing tie rod to rack, fold tab washer end (2 locations) to tie rod notch.
Fig.9 Concave Section Of Band Adjustment
26. Touch pliers against the concave section of the bellows band and tighten the bellows band.
27. Use a plastic hammer or similar to bend the convex section of the bellows band as shown.
