Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
2. Remove the snap ring with the snap ring pliers and then remove the spider assembly.
CAUTION: Do not disassemble the spider assembly.
3. In case foreign objects such as water or dust is mixed in the grease, be sure to wash the spider assembly.
CAUTION: In case of having washed the spider assembly, when assembling it, make sure to push enough grease between the spider axle
and the roller so that grease may not run out.
B. T.J. boot/Birfield Joint (B.J.) boot removal. (6 & 9)
1. Wipe the grease off of the spline portion.
2. Remove the T.J. boot and B.J. boot.
NOTE: If the boots are reused, wrap plastic tape around the drive shaft spline so that the boots are not damaged when they are removed.
INSPECTION
1. Check the drive shaft for damage, bending or corrosion.
2. Check the drive shaft spline part for wear or damage.
3. Check for entry of water and/or foreign material into B.J.
4. Check the spider assembly for roller rotation, wear or corrosion.
5. Check the groove inside T.J. case for wear or corrosion.
6. Check the boots for deterioration, damage or cracking.