Talon FWD L4-1997cc 2.0L DOHC (1990)
Air Door Cable: All Technical Service Bulletins
Heater Selector - Difficult to Operate
Models
1990 BD Body
Subject
Inoperative Or Incorrect Mode Selection
Index
HEATING AND AIR CONDITIONING
Date
July 30, 1990
No.
24-54-90
(C24-03-0)
P-2240
BODY CODE LEGEND
BD - TALON
SYMPTOM/CONDITION
The heater or air conditioner mode selector may indicate an incorrect mode or be difficult to operate. This may be caused by a bent mode selection
control cable.
PARTS REQUIRED
1 Vinyl Sleeve
PN MB849123
FIGURE 1
REPAIR PROCEDURE
To prevent binding or bending of the mode selection control cable a vinyl sleeve must be added to the mode selection damper lever. This lever is located
on the left side of the heater unit directly above the distribution floor duct (Figure 1).
1.
Inspect the mode selection control cable. If it is bent, replace it as outlined in the 1990 Laser/Talon Service Manual Publication #
81-270-0501.
2.
Move the mode selection knob to the defrost position.