Talon FWD L4-1997cc 2.0L DOHC (1990)
7. Attach the torque wrench to the special tool (inner), and repeat "tightening" and "returning" at a torque of 10 Nm (7.2 ft.Ibs.) two times. Then,
tighten it to a torque of 5 Nm (3.6 ft.lbs.). Then, back off the special tool (inner) 2 to 21A turns.
8. Engage the special toot (outer) on the lock nut. Rotating the outer cyliner clockwise and the inner cylinder counterclockwise, unlock the lock nut
and special tool (inner).
Caution:
When unlocking the lock, apply equal force to both tools.
9. Tighten the lock nut by hand unti the lock nut contacts the piston. Then, using the torque wrench, tighten to the specified torque.
Lock nut: 25-32 Nm (18-23 ft.lbs.)
Caution:
If it is rapidly tightened with the socket wrench or torque wrench, the lock nut and adiusting rod may rotate together.
10. Remove the special tool which fastens the piston. Attach the plug to the outlet of the low reverse pressure.
