Talon FWD L4-1997cc 2.0L DOHC Turbo (1995)
Wheel Speed Sensor: Testing and Inspection
1. Raise and support vehicle, release parking brake.
2. Disconnect ABS ECU harness connector.
Fig 81 Wheel Speed Sensor Voltage Inspection
Fig 82 Wheel Speed Sensor Voltage Inspection
3. Rotate wheel 1 turn per second and measure voltage between terminals shown.
4. Voltmeter should indicate a voltage signal of 70 or more mV.
5. If voltage is lower than 70 mV, check wiring harness and speed sensor. Repair or replace as necessary.