Talon FWD L4-1997cc 2.0L DOHC Turbo (1995)
Clutch Slave Cylinder: Service and Repair
1. Drain clutch fluid into a suitable container.
2. Disconnect clutch slave cylinder tube connections.
3. Remove slave cylinder retaining bolts then the slave cylinder.
4. Reverse procedure to install, noting the following:
a. Apply multi-purpose grease to slave cylinder pushrod where it contacts the release fork.
b. Bleed hydraulic clutch system, refer to Transmission and Drivetrain/Clutch, M/T /Service and Repair/HYDRAULIC CLUTCH BLEED.
