Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
3.
The diagnostic trouble code can be erased by turning the ignition switch to "ON" while the brake pedal is depressed. Quickly operate the brake
pedal 10 times in succession according to Figure 3. The data link connector pin 1 must be grounded. After the code is erased, the ABS warning
lamp will flash quickly and continuously.
NOTE:
THE DTC CANNOT BE ERASED IF THE STOP LAMP SWITCH IS NOT TURNED ON AND OFF ACCORDING TO THE TABLE OR IF
THE GENERATOR L TERMINAL VOLTAGE INCREASES TO A HIGH VOLTAGE STATE.
POLICY: Information only