Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
DISASSEMBLY
NOTE: When disassembling the disc brakes, disassemble both sides (left and right) as a set.
1. Follow removal procedure as outlined in above image.
2. Protect caliper body with cloth, while blowing compressed air through brake hose to remove piston boot and piston.
CAUTION: Blow compressed air gently.
3. Remove piston seal with finger tip.
CAUTION: Do not use a flat-tipped screwdriver or other tool to prevent damage to inner cylinder.
4. Clean piston surface and inner cylinder with trichloro-ethylene, alcohol or specified brake fluid.