Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
b. Calculate clearance A from the B, C and D measurements. A = B - C - D
Standard value: 0.00 - 0.25 mm (0.00 - 0.010 inches)
NOTE: When brake booster negative pressure 67 kPa (9.7 psi) is applied, clearance value will become 0.1 - 0.3 mm (0.004 - 0.012 inches).
If the clearance is not within the standard value range, turn the push rod screw to achieve desired length.
c. If the clearance is not within the standard value range, turn the push rod screw to achieve desired length,
5. Fill master cylinder with brake fluid.
6. Bleed the brake system. See: Brake Bleeding
7. Adjust brake pedal. See: Brake Pedal Assy
