Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Engine Mount: Service and Repair
Engine Roll Stopper
REMOVAL
1. Rear roll stopper bracket assembly
2. Front roll stopper bracket assembly
CAUTION:
*: Indicates parts which should he temporarily tightened, and then fully tightened with the vehicle on the ground in the unladen condition.
Follow removal steps outlined in illustration.
INSPECTION
-
Check each insulator for cracks or damage.
-
Check each bracket for deformation or damage.
INSTALLATION
Installation in reverse order as removal.
Installation Service Point
A. Front Roll Stopper Bracket Assembly Installation.
If the dimension shown in the illustration is outside the standard value when the weight of the engine is on the body, replace the front roll stopper
bracket assembly.
