Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
3. Use a press or vise to gently compress the auto tensioner push rod until pin hole A of the push rod and pin hole B of the tensioner cylinder are
aligned.
CAUTION: If the compression speed is too fast, the rod may become damaged, so be sure to carry out this operation slowly.
4. Once the holes are aligned, insert the set pin.
NOTE: When replacing the auto tensioner with a new part, the pin will be in the auto tensioner.
5. Install the auto tensioner to the engine.
B. Timing Belt Installation
1. Align the timing marks on the camshaft sprocket, crankshaft sprocket and oil pump sprocket.
