eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Relays and Modules - Starting and Charging > < Air Bag Control Module|Locations|Page 190
Page 2
background image

CAUTION:  The SRS may not activate properly if SRS-ECU is not installed properly, which could result in SRS system not operating properly.

Post-installation Inspection 
Reconnect the negative battery terminal. Turn the ignition key to the ON" position. Does the "SRS" warning light illuminate for about 7 seconds, turn
OFF and then remain OFF? If yes, SRS system is functioning properly.  See: Restraint Systems/Air Bag Systems/Testing and Inspection

INSPECTION

-

Check the SRS-ECU case and brackets for dents, cracks or deformation.

-

Check connector for damage, and terminals for deformation.

CAUTION:  If a dent, cracks, deformation or rust is discovered, replace the SRS-ECU with a new one.

NOTE:  For checking of the SRS-ECU other than described above,    See: Restraint Systems/Air Bag Systems/Testing and Inspection/Flow of
Diagnosis.

Relays and Modules - Starting and Charging > < Air Bag Control Module|Locations|Page 190