Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Transmission Speed Sensor: Testing and Inspection
PULSE GENERATOR A CHECK
1. Disconnect the pulse generator A connector.
2. Measure the resistance between the pulse generator A side connector terminals 1 and 2.
Standard value: 330-390 ohms [at 20° C (68°F)]
3. If the resistance is outside the standard value, replace the pulse generator assembly.
PULSE GENERATOR B CHECK
1. Disconnect the pulse generator B connector.
2. Measure the resistance between the pulse generator B side connector terminals 3 and 4.
Standard value: 330-390 ohms [at 20° C (68° F)]
3. If the resistance is outside the standard value, replace the pulse generator assembly.