Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Check clearance between the snap ring and clutch reaction plate. To check the clearance, hold entire circumference of the clutch reaction plate down
with 50 N (11 lbs.) force. If clearance is out of standard value, select a snap ring to obtain the standard value.
Standard value: 1.0-1.2 mm (0.039-0.047 inch)
-D- Input Shaft Installation
Install the input shaft with one of its oil groove aligned with the punch mark on the rear clutch retainer.