Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Use the special tool to remove the taper roller bearing.
-C- Lock Pin Removal
Use a pin punch to drive out the lock pin.
NOTE: Sometimes the lock pin is removed very easily.
REASSEMBLY
Reassembly in reverse order as disassembly.
Reassembly Service Points
-A- Spacer / Side Gear Washer / Pinion / Pinion Shaft Installation
1. Fit the spacer to the back face of the side gear, then install the gear into the differential case.
2. Fit washer to back of pinion and rotate two pinions simultaneously to mesh with the side gear.
3. Insert the pinion shaft.