Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
CAUTION: When press-fitting the sleeve to the input shaft, make sure that the sleeve flange is closely fitted to the bearing.
>H< Front Taper Roller Bearing Installation
Synchronizer Ring
1. Check the clutch gear teeth for damage and breakage.
2. Check the internal surface for damage, wear and broken threads.
3. Force the synchronizer ring toward the clutch gear and check clearance "A". Replace if it is out of the limit.
Limit: 0.5 mm (0.02 inch)
Synchronizer Sleeve And Hub