Vision V6-201 3.3L (1993)
Brake Fluid Level Sensor/Switch: Description and Operation
Master Cylinder W/Center Valves & Fluid Level Switch-FLS-1
The master cylinder is a standard tandem design with the exception of central valves that are used in conjunction with existing compensation ports. The
center valve is a spring loaded ball and seat design which is unseated by a stop in the master cylinder when brakes are released.
A fluid level switch is located in the master cylinder fluid reservoir. The switch closes when low fluid level is detected, and the FLS-1 turns on the
warning lamp. This will not disable the ABS system.