Vision V6-3.5L VIN F (1997)
Battery Discharge Protection Relay: Testing and Inspection
-
For the A3 circuit, check for a blown 30 amp fuse located in cavity H of the PDC
-
For the A13 circuit, check for a blown 20 amp fuse located in cavity F of the PDC
-
For the left low beam headlamp, check for a blown 15 amp fuse located in cavity 15 of the junction block
-
For the left high beam headlamp, check for a blown 15 amp fuse located in cavity 11 of the junction block
-
For the right low beam headlamp, check for a blown 15 amp fuse located in cavity 16 of the junction block
-
For the right high beam headlamp, check for a blown 15 amp fuse located in cavity 12 of the junction block
-
For the left front lamps check the grounding point at the left frame rail.
-
For the right front lamps check the grounding point at the right frame rail.
-
Check the parking brake switch operation
-
Check the 10 amp fuse in cavity F2 of the PDC
-
Check the 30 amp fuse located in cavity H of the PDC. If this fuse is blown the headlamps will not operate
-
Check the headlamp grounds located at the left front frame rail and the right frame rail