Aerostar V6-183 3.0L (1986)
2.
Remove body side door window latch spring (1127178), two screws, and two body side door window latch retainers (11302A22) to remove body
side door window latch handle (1127170), Figure 8.
Figure 9 - Article 87-4-15
3.
Remove body side door window stop (1125780) by pulling it out from outside lower rear part of window assembly, Figure 9.
4.
Move sliding window all the way rearward until outside glass area, 1.00 inch wide rear of division bar, is exposed.
Figure 10 - Article 87-4-15
5.
Clean outside glass area, 1.00 inch wide rear of division bar for length of division bar, with isopropyl alcohol. Make sure that glass surface is clean
and let air dry for two minutes. Figure 10.
NOTE:
Seal lip must face front of vehicle.
