Aerostar 2WD V6-182 3.0L (1995)
Wiper Switch: Service and Repair
Windshield Wiper Switch
REMOVAL AND INSTALLATION
1. Remove steering column shroud.
2. Remove two multi-function switch to steering column casting self-tapping screws, then disengage switch from casting.
3. Disconnect two switch electrical connectors.
4. Reverse procedure to install, noting the following:
a. Torque switch self-tapping screws to 18-27 in lb.
NOTE: On models equipped with automatic transmission, ensure PRNDL adjustment is correct.
