Aerostar 2WD V6-183 3.0L (1991)
Blower Motor: Service and Repair
Standard
1.
Disconnect battery ground cable.
2.
Remove air cleaner and/or air inlet duct, if necessary.
3.
Disconnect electrical connector and ventilation tube from blower motor.
Fig. 27 Disassembled view of blower motor & wheel assembly
5.
Remove blower motor mounting plate attaching screws, position ventilation tube aside and remove blower motor from housing, Fig. 27.
6.
Reverse procedure to install, using new gasket and sealer as required.
Auxiliary Heater
1.
Disconnect battery ground cable.
2.
Remove first seat behind driver, if equipped.
3.
Remove service panel and three screws from solenoid bracket.
4.
Disconnect electrical connector and ventilation tube from blower motor.