ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Heater - Insufficient Heat To Front Seat Floor Area|Page 5084 > < Air Door Actuator / Motor, HVAC|Service and Repair
Page 1
background image

Air Duct: Customer Interest
Heater - Insufficient Heat To Front Seat Floor Area

^

HEATER - INSUFFICIENT HEAT IN THE FRONT SEAT FLOOR AREA - VEHICLES BUILT BEFORE 11/30/89

^

HEATER - NEW FLOOR DUCT EXTENSIONS FOR IMPROVED DISTRIBUTION OF HEAT TO THE FRONT SEAT FLOOR
AREA-VEHICLES BUILT BEFORE 11/30/89

Article No. 90-9-9

LIGHT TRUCK:

1986-90 AEROSTAR

ISSUE:

Insufficient heat in the front seat floor area may be caused by the design of the floor ducts. The duct work may not be long enough to properly
distribute heat to the floor area.

CAUTION:

Install floor duct extensions on both the passenger's and driver's side. Refer to following procedure for service details.

1. Install driver side floor duct extension (FO9Z-18C299-C).

a. Position floor duct extension to plenum.

b. Install screw to attach floor duct to dash panel.

Figure 1

2. Modify the passenger side duct extension (FO9Z-18C299-B) as shown in Figure 1.

Heater - Insufficient Heat To Front Seat Floor Area|Page 5084 > < Air Door Actuator / Motor, HVAC|Service and Repair