Aspire L4-81 1.3L SOHC (1994)
2.
Adjust the gap by twisting the rubber fuel supply hose on the fuel filter outlet (twist 90° clockwise as viewed from the front of the vehicle).
The twisting action lifts the hose away from the accelerator cable. After rotating, ensure that the fuel supply hose is 10 mm above the
accelerator cable. See Figure 3.
D.
Rubber Fuel Return Hose to Wiring Harness Clearance
NOTE:
The following procedure adds one additional tie strap to the harness. Do not remove the existing tie strap form the harness.