Aspire L4-81 1.3L SOHC (1994)
6. Remove the front safety belt retractor bolt and washer from the lower B-pillar.
CAUTION: Do not disassemble the front safety belt buckle end or front safety belt retractors.
7. Remove the front safety belt retractor and tongue.
INSTALLATION
1. Position the front safety belt retractor and tongue in the vehicle.
2. Install the front safety belt retractor bolt and washer. Tighten the front safety belt retractor bolt to 38-78 Nm (28-58 lb-ft).
3. Install the anchor bolt and washer. Tighten the anchor bolt to 38-78 Nm (28-58 lb-ft).
4. Replace the cover over the anchor bolt.