Bronco L6-300 4.9L VIN Y 1-bbl (1983)
Engine Mount: Service and Repair
Fig. 4 Engine mounts. 1980 F-100---350 & Bronco w/6-300 engine
Fig. 5 Engine mounts. 1981---87 F-100---350 & Bronco w/6-300 engine
Bronco & F-100-350
1.
Remove insulator-to-support bracket attaching nut and washer. If only one insulator is being removed, loosen the opposite insulator at support
bracket.
2.
Raise engine slightly using a block of wood placed under oil pan and a suitable jack.
3.
Remove insulator attaching bolts and the insulator, Figs. 4 and 5.
4.
Reverse procedure to install.
