ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Wheels and Tires|Wheels > < Wheel Hub (Locking)|Service and Repair|Page 3861
Page 1
background image

Tires: Technical Service Bulletins
Steering - Pull/Drift Diagnostic Procedures

Article No. 84-19-19

STEERING PULL/DRIFT/ROADABILITY - DIAGNOSTIC PROCEDURES

LIGHT TRUCKS 1980-84 F100-350, BRONCO, ECONOLINE

Section 19 of the 1983 and 1984 Light Truck Shop Manuals provides procedures to resolve most roadability concerns experienced to date. These
procedures can be applied to any 1980 and later model light trucks.

When servicing 4 wheel drive vehicles with limited slip front axles, front tire circumference is the most probable cause if the pull is only present when
the hubs are locked. Installing the two most evenly matched tires on the front axle should resolve the concern.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Wheels and Tires|Wheels > < Wheel Hub (Locking)|Service and Repair|Page 3861