Bronco L6-300 4.9L VIN Y 1-bbl (1983)
Wheel Hub (Locking): Service and Repair
Manual Locking Hub (Warner)
1980---87 F-150---350 & BRONCO W/MANUAL HUBS
Removal & Disassembly
1.
Remove cap assembly capscrews and the cap assembly, Fig. 5.
2.
Remove snap ring from end of axle shaft.
3.
Remove lock ring from wheel hub groove.
4.
Remove body assembly from wheel hub. If necessary, a puller may be used to remove body assembly.
Assembly & Installation
1.
Install body assembly onto wheel hub, Fig. 5.
2.
Install lock ring into hub groove, then the snap ring onto axle shaft.
3.
Install cap assembly and torque capscrews to 35---50 inch lbs.
