Bronco L6-300 4.9L VIN Y 1-bbl (1983)
Wiper Gear Box: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove both wiper arm and blade assemblies.
3.
Remove cowl grille attaching screws and raise the grille slightly.
4.
Disconnect windshield washer fluid hose, then remove cowl grille.
5.
Remove clip securing right and left linkage and the retaining clip from wiper motor arm.
6.
Remove 3 pivot body-to-cowl panel attaching screws, then the arm and pivot shaft assembly.
7.
Reverse procedure to install.
