Bronco L6-300 4.9L VIN Y 1-bbl (1983)
Wiper Motor: Service and Repair
F-100---350 & BRONCO
1.
Disconnect battery ground cable.
2.
Remove both wiper arm and blade assemblies.
3.
Remove cowl grille attaching screws and raise the grille slightly.
4.
Disconnect washer nozzle hose, then remove cowl grille assembly.
5.
Remove wiper linkage clip from motor output arm.
6.
Disconnect wiper motor electrical connector.
7.
Remove wiper motor attaching screws and the wiper motor.
8.
Reverse procedure to install.
