ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Idle Speed:|832220 > < Recall 84V119000: Carburetor Throttle Shaft Sticking
Page 1
background image

Idle Speed: All Technical Service Bulletins
Idle Speed - Low Idle Speed/Stalls

Article No. 84-14-22

IDLE - LOW IDLE SPEED/STALLS DURING 30~ - 40~ WET WEATHER CONDITIONS - (5.0L)

LIGHT TRUCKS 1984 BRONCO, ECONOLINE AND F SERIES

CALIBRATIONS: 4-54E, L, R, T and W

For low idle speeds and/or stalls in wet weather with temperature of 30~ to 40~F on cold start and driveaway, check idle speeds as outlined in the Shop
Manual and adjust as necessary. Reset the fast idle cam speed to 2350 rpm per procedure on emission decal.

Using a marking pen, modify emission decal to show new fast idle speed.

Obtain an Authorized Modifications decal and list the date, dealer number and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information decal suitable for installing the Authorized Modifications decal. Clean the area, install the decal and cover it
with a clear plastic decal shield.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: 9500C
TIME:

0.3 Hr.

OPERATION: 9500CS1
TIME:

0.1 Hr. DLR. CODING: Basic Part No. DRIVE Code: F7

All Technical Service Bulletins for Idle Speed:|832220 > < Recall 84V119000: Carburetor Throttle Shaft Sticking