Bronco Full Size V8-302 5.0L (1986)
Figure 24
NOTE:
To complete the connection when NEITHER a junction block NOR an auxiliary battery relay is present, assemble a Blue (D6TZ-14489-A)
hardshell wiring connector and a (D20Z-14474-B) wire terminal and install onto the remaining end of the (new) rerouted 10 gauge wire and
connector the wire and connector assembly to the existing (previously unused Blue) take-out (pan of the #37 (Yellow) circuit), as shown in
Figure 24.
9.
Reconnect the battery and verify the condition has been corrected.
1983-85 Units (Without Fuse Links):
1.
Repeat Steps 1 and 2 under "General Instructions".