Bronco Full Size V8-302 5.0L (1986)
![background image](/ford/bronco_full_size/v8-302_5.0l/Page-1292001.png)
Ignition Switch: Service and Repair
Fig. 3 Ignition switch replacement
1.
Disconnect battery ground cable.
2.
Remove steering column shroud and lower the steering column.
3.
Disconnect electrical connector from switch, then remove 2 switch attaching nuts.
4.
Lift switch up to disengage actuator rod, then remove switch from vehicle, Fig. 3.
5.
Reverse procedure to install.