ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Toe Adjustment > < Wheel Bearing Inspection

C-MAX 2003.75 (06.2003-)

Suspension System - General Information - Rear Toe Adjustment C-MAX 2003.75 (06/2003-)
General Procedures

General Equipment
Four wheel alignment equipment
NOTE:
NOTE:The checking and subsequent adjustment of the rear toe setting should be carried out on a flat surface and in accordance with the manufacturers instructions for the particular wheel alignment equipment being used.
  1. NOTE:
    NOTE:Final tightening of the rear suspension components should be carried out when the vehicle weight is on the road wheels.
    Using suitable four wheel alignment equipment, check the toe setting.
  1. Check the tire pressures and adjust as necessary.
  1. Make sure the vehicle is at curb weight and that the spare wheel, jack and vehicle tools are stowed in their designated positions. Additional items should be removed from the vehicle.
  1. Bounce the vehicle to make sure that the suspension is in its normal resting position.

  1. Loosen the rear lower arm adjustment cam nut.

  1. NOTE:
    NOTE:Do not fully tighten the rear lower arm adjustment cam nut at this stage.
    Tighten the rear lower arm adjustment cam nut.

  1. Adjust the toe setting.

  1. Tighten the rear lower arm adjustment cam nut.

Front Toe Adjustment > < Wheel Bearing Inspection