| Removal and Installation Name Specification Lubricant ESE-M99B144-B | | -
Release the parking brake. | | | -
Remove the air deflector on both sides. | 4. Remove the components in the order indicated in the following illustration(s) and table(s). 3 - Exhaust system heat shield center section 4 - Exhaust system heat shield front section 6 - Parking brake cable support clips 7 - Parking brake cable support brackets 8 - Parking brake equalizer 9 - Parking brake cable floor panel clips 5. To install, reverse the removal procedure. Removal Details Item 1 : Exhaust muffler and tailpipe assembly | | -
CAUTION:Over bending of the exhaust flexible pipe may cause damage resulting in failure. Support the exhaust flexible pipe with a suitable support wrap or suitable splint. | | | -
Detach the exhaust muffler and tailpipe assembly from the exhaust flexible pipe. - Discard the gasket and nuts.
| Item 2 : Exhaust hanger insulators NOTE:Support the exhaust muffler and tailpipe assembly. Item 5 : Brake caliper parking brake levers | | -
NOTE:The left-hand parking brake cable has a black sleeve and the right-hand parking brake cable has a white sleeve. Note the colour of the sleeves to aid installation. Detach the parking brake cable from the brake caliper parking brake lever on both sides. | Item 8 : Parking brake equalizer | | -
NOTE:The left-hand parking brake cable has a black sleeve and the right-hand parking brake cable has a white sleeve. Note the colour of the sleeves to aid installation. Detach the parking brake cables from the parking brake equalizer. - Detach the parking brake cables from the bracket.
- Detach the parking brake cables from the equalizer.
| Installation Details Item 1 : Exhaust muffler and tailpipe assembly NOTE:Install a new exhaust flexible pipe gasket and nuts. Item 2 : Exhaust hanger insulators NOTE:Check the exhaust hanger insulators for damage and fatigue. Install new exhaust hanger insulators as required, using a suitable lubricant. | 
