Removal and Installation | -
NOTE:Make sure the road wheels are in the straight ahead position. Centralize the steering and lock it in position. | | -
Raise and support the vehicle. For additional information, refer to: Jacking (100-02 Jacking and Lifting, Description and Operation) / Lifting (100-02 Jacking and Lifting, Description and Operation). | | -
Remove the engine undershield (if equipped). - Rotate the locking tangs counterclockwise.
| 4. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Steering angle sensor electrical connector 2 - Steering angle sensor retaining screws 5. To install, reverse the removal procedure. |