In-vehicle Repair Special Tool(s) | Installer, Valve Stem Seal 303-037 | | Compressor, Valve Spring 303-060 | | Adapter for 303-060 303-060-05 | | Installer, Valve Stem Collets 303-362 | | Pliers, Valve Stem Seal 303-390 | Materials Name Specification Engine Oil - 5W-30 WSS-M2C912-A1 Removal | -
Remove the camshaft. For additional information, refer to: Camshafts (303-01E Engine - 1.8L Duratorq-TDCi (Lynx) Diesel, In-vehicle Repair). | | -
Position the apropriate piston at top dead center (TDC). | | -
Using the special tools, remove the valve springs. | | -
Using the special tool, remove the valve stem seals. | Installation | -
NOTE:Cover the collet grooves with adhesive tape during installation of the valve stem seals. Using the special tool, install the valve stem seals. | | -
Using the special tools, install the valve springs. | | -
Install the camshaft. For additional information, refer to: Camshafts (303-01E Engine - 1.8L Duratorq-TDCi (Lynx) Diesel, In-vehicle Repair). | | |