Removal and Installation | -
Remove the air cleaner outlet pipe. | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 3. To install, reverse the removal procedure. | -
NOTE:Do not press the accelerator pedal during the initialization period as this will prevent the complete initialization of the throttle body. Turn the ignition key to position II and wait for one minute to initialize the throttle body. | | -
Turn the ignition key to the OFF position. | Removal Details Item 1 : Throttle body electrical connector | -
Disconnect the throttle body electrical connector. - Release the locking tangs.
| Installation Details Item 2 : Throttle body CAUTION:Hand start each throttle body retaining bolt by three full turns. |