Removal and Installation Worldwide Diagnostic System (WDS) | -
Disconnect the battery ground cable. For additional information, refer to: Battery Disconnect (414-01 Battery, Mounting and Cables, General Procedures). | | -
Remove the engine upper cover. | 3. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Charge air temperature sensor 2 - Manifold absolute pressure (MAP) sensor 3 - Intake air shutoff throttle electrical connectors 4 - Intake air shutoff throttle intake pipe 5 - Charge air cooler bypass pipe retaining clamp 6 - Intake manifold intake pipe retaining clamp 7 - Intake air shutoff throttle retaining bolts 8 - Intake air shutoff throttle 4. To install, reverse the removal procedure. | -
Vehicles with global closing, initialize the door window motors. For additional information, refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures). | |