Removal and Installation Dowel with a diameter of 5mm Removal | -
Remove the engine upper cover. | | -
Detention the accessory drive belt. - Rotate the accessory drive belt tensioner counterclockwise.
- Install a suitable dowel with a diameter of 5mm into the hole of the accessory drive belt tensioner bracket.
| | -
Remove the engine undershield. - Rotate the locking tangs counterclockwise.
| | -
Remove the accessory drive belt. | Installation | -
To install, reverse the removal procedure. | | -
Install the accessory drive belt to the accessery drive belt pulleys in the order indicated. | | |