Removal and Installation Special Tool(s) | Release Tool. Belt Tensioner 303-676 (21-235) | General Equipment Dowel with a diameter of 5mm 3. Remove the components in the order indicated in the following illustration(s) and table(s). 4. To install, reverse the removal procedure. Removal Details Item 1 : Accessory drive belt tensioner Installation Details Item 1 : Accessory drive belt tensioner | -
Using the special tool reset the accessory drive belt tensioner to the detention position. - Rotate the tensioner clockwise.
- Install the dowel with a diameter of 5mm into the hole of the accessory drive belt tensioner bracket.
| |