Removal and Installation General Equipment Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: Engine Cooling System Health and Safety Precautions (100-00 General Information, Description and Operation). | | -
WARNING:When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth. Loosen: 2 turn(s) -
Close the coolant expansion tank cap. | Vehicles built up to 11/2007 Vehicles built 11/2007 onwards | -
NOTE:The O-ring seal is to be reused unless damaged. | Installation | -
To install, reverse the removal procedure. | | -
Refer to: Cooling System Draining, Filling and Bleeding (303-03C Engine Cooling - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4), General Procedures). | |