ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Brake Pedal Position (BPP) Switch > < Rear Knock Sensor (KS) - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)

C-MAX 2003.75 (06.2003-)

Electronic Engine Controls - Front Knock Sensor (KS)—1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) C-MAX 2003.75 (06/2003-)
Removal and Installation

Materials
Name
Specification
Metal Surface Cleaner
WSE-M5B392-A
  1. Remove the intake manifold. For additional information, refer to Section  303-01A Engine / 303-01B Engine / 303-01C Engine / 303-01D Engine / 303-01E Engine / 303-01F Engine.

  1. Disconnect the front KS electrical connector.

3. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Front KS
See Removal Detail
See Installation Detail

4. To install, reverse the removal procedure.

Removal Details

Item 1 : Front KS

NOTE:
NOTE:Make a note of the position of the front KS and make sure it is positioned in the same position when installed.

Installation Details

Item 1 : Front KS

NOTE:
NOTE: Prior to installing the front KS, clean the engine block and front KS mating surfaces with metal surface cleaner.
NOTE:
NOTE:Make sure the front KS is installed in the same position as removed

Brake Pedal Position (BPP) Switch > < Rear Knock Sensor (KS) - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)