ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Transfer Shaft > < Final Drive Carrier and Differential Assembly

C-MAX 2003.75 (06.2003-)

Automatic Transmission/Transaxle - Vehicles With: 4-Speed Automatic Transmission (4F27E) - Pump Assembly C-MAX 2003.75 (06/2003-)
Disassembly and Assembly of Subassemblies

Special Tool(s)

Installer, Drive Pinion Oil Seal

205-115 (15-058)
Materials
Name
Specification
Automatic transmission fluid
WSS–M2C202–B 

Disassembly
  1. Remove the top portion of the pump.

  1. Inspect the lower portion of the pump and gear pocket for nicks, scratches, gouges or wear.

  1. Remove the pump seal.

  1. Inspect the upper portion of the pump for nicks, scratches or gouges.

  1. Inspect the pump gears for nicks, scratches or gouges.

Assembly
  1. NOTE:
    NOTE:The smaller gear has a recess on both sides.
    NOTE:
    NOTE:The smaller recess must face away from the torque converter seal.
    NOTE:
    NOTE:The larger recess, with the beveled edge, must face toward the torque converter.
    Lubricate the gears and thrust washers with clean automatic transmission fluid.

  1. Using the special tool, install the pump seal.

  1. Install the top portion of the pump.

Transfer Shaft > < Final Drive Carrier and Differential Assembly