| Removal and Installation | | -
Disconnect the battery ground cable.
For additional information, refer to: Battery Disconnect.
| 2. Remove the components in the order indicated in the following illustration(s) and table(s). 2 - Front door pull handle cover 4 - Front door pull handle retaining bolts 6 - Front door power window control unit bezel (front door trim panel pull handle shown removed for clarity) 3. To install, reverse the removal procedure. | | -
Initialize the door window motors.
For additional information, refer to: Door Window Motor Initialization.
| Removal Details Item 1 : Front door latch remote control handle bezel | | -
Remove the front door latch remote control bezel - Operate the front door latch remote control release handle
- Remove the front door latch remote control bezel from the front door latch remote control.
| Item 3 : Front door power window control unit electrical connector | | -
Disconnect the front door power window control unit electrical connector. | Item 5 : Front door trim panel | | -
NOTE:Detach the front door trim panel starting from the top front corner down to the bottom rear corner of the door before the front door trim panel is removed. Remove the front door trim panel | Item 7 : Front door trim panel retaining clips | | -
Remove the front door trim panel retaining clips. - Release the front door trim panel retaining clip retainer locking tang.
- Remove the front door trim panel retaining clip.
| Installation Details Item 7 : Front door trim panel retaining clips | | -
NOTE:Make sure that the front door trim panel retaining clips are in the closed position. Install the front door trim panel retaining clips to the front door trim panel retaining clip retainer. | | 
