Removal and Installation | -
Remove the C pillar trim panel. For additional information, refer to C-Pillar Trim Panel - in this section. | | -
Remove the D pillar trim panel. For additional information, refer to D-Pillar Trim Panel - in this section. | | -
Remove the rear parcel shelve(s) (if equipped). | 6. Remove the components in the order indicated in the following illustration(s) and table(s). 2 - Loadspace scuff plate trim panel retaining clips 3 - Loadspace scuff plate trim panel 5 - Loadspace trim panel stowage cover 6 - Loadspace trim panel stowage retaining strap 7 - Loadspace trim panel retaining screws 7. To install, reverse the removal procedure. Removal Details Item 8 : Loadspace Lamp | -
Remove the loadspace lamp. - Detach the loadspace lamp front the loadspace trim panel.
- Disconnect the load space lamp electrical connector.
| Item 9 : Loadspace trim panel | -
NOTE:Do not place excessive strain on the auxiliary 12 volt supply wiring harness. Detach the loadspace trim panel from the body. | Item 10 : Auxiliary 12 volt supply electrical connector | -
Disconnect the auxiliary 12 volt supply electrical connector. | Installation Details Item 11 : Loadspace trim panel retaining clips | -
Install the loadspace trim panel retaining clips to the loadspace trim panel. | Item 4 : Loadspace scuff plate trim panel retaining clips | -
Install the loadspace scuff plate trim panel retaining clips to the loadspace scuff plate trim panel. | |