Removal and Installation Removal | -
Remove the high mounted stoplamp. - Remove the retaining screws.
- Disconnect the electrical connector.
| | -
Remove the liftgate trim panels. - Remove the retaining screws.
| | -
Detach the spoiler from the liftgate. - Remove the retaining bolts.
- Remove the retaining screws.
| | -
Disconnect the liftgate glass washer nozzle hose from the liftgate. | | -
Remove the spoiler. - Feed the high mounted stoplamp wiring harness through the spoiler.
| Installation | -
To Install, reverse the removal procedure. | | |