| Removal and Installation | | -
Remove the Rear Center Seat. For additional information, refer to the Owner’s Literature. | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 3. To install, reverse the removal procedure. Removal Details Item 1 : Underseat trim panel (if equipped) | | -
Remove the underseat trim panel. - Detach the front retaining clips from the seat base.
- Detach the rear retaining clips from the seat base.
| Item 2 : Cushion pad | | -
Remove the cushion cover and pad from the cushion base. - Detach the retaining strip.
| Item 3 : Cushion cover | | -
Remove the cushion cover. - Roll the cushion cover inwards to access the pleating hog rings.
- Cut the hog rings.
| Installation Details Item 3 : Cushion cover | | -
Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap as illustrated. | Item 1 : Underseat trim panel (if equipped) | | -
Attach the rear retaining clips to the seat base (cushion cover and pad shown removed for clarity). | | | -
CAUTION:Make sure that the front retaining clips are correctly engaged with the seat base. NOTE:An audible click will be heard on engagement of the front retaining clips. Install the underseat trim panel (cushion cover and pad shown removed for clarity). - Attach the front retaining clips to the seat base.
| | 
