Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
^
The NGS tester will display:
^
Turn the switch on the cable to the On position.
^
The NGS tester will display (for 5 seconds):
^
The NGS tester will then display:
The number of bytes downloaded will also appear on the NGS screen (these numbers will reset two (2) times automatically). Calibration file
downloading will take approximately 4 minutes.
^
When the calibration of the VCL is complete, the NGS screen will display:
^
Remove the power cable from the cigar lighter, disconnect cable K1-124 from the NGS tester and the VCL.
^
Affix VCL Calibration Label to VCL.
^
Position VCL in mounting slot. Align Velcro strips. Firmly press module and Velcro together.
^
Connect VCL electrical connector.
^
With ignition key in Off position, connect connector J/P26.